From Old Motors Into Signal Booster

Do you have old dc motors / any motors? don't throw them! lets recycle it!

Lets make a signal booster!!

For:

• Phone
• Smartphones
• Modem
• Wifi
• & anything

Simple to make, Super signal booster, easy to use and carry, light and thin, And many more.

Suitable for use when an adventure, because the signal will weaken as in the wild. Insert the signal booster into your phone, and Voila your signal is increased.

OK LET'S MAKE IT!!!!!!!!!!

1. Old motors
2. Clear tape
3. Scissors
4. Matchstick / lighter

Its FREE!!!

Open the motors, & take the coil.

Choose the best coil to make the best signal booster (i use the yellow coil)

1. Cut the wire from the coil with scissors
2. Roll the wire with your fingers (image 2 & 3)
3. Make another roll (image 4 & 5)

Use matchstick / lighter to burn the wire. Burn the two wire to make the wire receive the signal. Only burn the roll wire!

• Cut a small clear tape
• Paste the two wire to the clear tape (image 2)
• Cut another small clear tape
• Paste another tape (image 4)
• Cut the edge of the case (Image 5)

• Turn off your phone

• Put the signal booster near your simcard

• Turn on your phone
• And see the difference!!

Thanks for look my works.

Sorry for my bad english :v

Please share, like, subscribe and vote my works

Thanks!