Frisbee Golf & Drone Gates
My friends and I like to play Frisbee Golf (Folf) and fly FPV drones. We wanted a portable, easy to set up and inexpensive course for our picnics and camping trips. This is what I came up with.
Enjou
Materials
Materials :
Plastic buckets and lids. Sometimes free from a nearby restaurant but cheap enough from stores
Garden plant hangers. I got mine on sale but cheap enough at almost any home and garden outlet
Cord/rope. Pick you size, color and material
Tools and Such
Tools:
Measuring device
Drill and driver
Marking pens
Scissors
Lighter for burning the ends of the cord if you think you need to
Marking and Prep
Mark where the holes will go for the cord and remove the o-ring seal if necessary
Initial Assembly
Drill holes large enough for the cord to fit through
Push the cord through and tie so the cord won't pull through
Mark the gate/hole numbers
Assembly and Setup
I created double loops and attached the lid/loop assemblies to the garden hangers and finally used one of the left over buckets to hold my frisbees and discs.
Bonus was being able to fly my quadcopters through the course when I needed a break from throwing
Enjoy