Halloween Folk Art Fox Decoration and a Kitsune Mask.

I'll be showing you how to make folk art fox decorations.

Very simple, cheap, and easy.

This can also be for your doors, cabinets, and drawers

(Top and Bottom drawers.)

I spaced out and made the words bigger for people who have bad eyesight or has trouble reading. And if you need someone to read it to you ask your sibling, parents, and friends.

These projects are all original

(◕ω◕✿)

1. Markers/Brush markers or pens. (Its optional or any markers)

2. String/ribbon.

3. Paper.

4. Cardboard.

There are two different ones were going to draw, one big and five or as many little ones. Your going to take a black in white pen or marker (You can use any pen or marker to draw out the fox even colored markers), then your going to draw out a folk fox along with some folk designs or any designs, it can even be your own original designs like mines.

Your going to pick any colored markers/pens and then color in your foxes, any colors you want.

And you can even take a sparkly gel pen or marker and then you can make them sparkly. (Optional)

Your going to make a tiny square ⬜ and cut a hole in the middle and tape it on the back of there heads or (I recommend this more then the square. I don't know why I just though of this) you can tape there backs on the string.

If your doing the square technique, your going to cut a piece of string/ribbon and tie it on the string/ ribbon. (make sure your string/ribbon is long enough for five to six foxes or more)

I also folded the square back and taped it behind there heads so it doesn't show.

Your big fox you can hang them/it on a door, cabinet drawers, and cabinets.

Hope you enjoyed this art project, I thought it'd be a nice and simple project yet affordable.

You can also make a folk/normal kitsune mask for a Halloween costume. The mask design will be in the images.

All you do is draw the design and outline the mask on a piece of cardboard or you can buy a plastic/clay fox mask and print a design on there (You can always do a original design) Then you just put two holes or hot glue the string/ribbon on the side of the mask.

It can be complex or easy depends if you want a challenging project. Hope you enjoy this project. ❀◕ ‿ ◕❀