Folded Book Art
![20150224_061255.jpg](/proxy/?url=https://content.instructables.com/F77/SR89/I6RSN6LT/F77SR89I6RSN6LT.jpg&filename=20150224_061255.jpg)
Create various shapes or letters using old books.
Get a Book
![20150224_083013.jpg](/proxy/?url=https://content.instructables.com/FQY/63II/I6RSN6GJ/FQY63III6RSN6GJ.jpg&filename=20150224_083013.jpg)
Any book will work, but a hardcover will stand up better.
Pages
![20150224_083026.jpg](/proxy/?url=https://content.instructables.com/FDK/TSZW/I6RSN6H5/FDKTSZWI6RSN6H5.jpg&filename=20150224_083026.jpg)
Bend the pages so it doubles in size
Drawing
![20150224_083144.jpg](/proxy/?url=https://content.instructables.com/FNU/G5YC/I6RSN6H9/FNUG5YCI6RSN6H9.jpg&filename=20150224_083144.jpg)
While the pages are bent over, draw your design (Solid shapes work best, or a "bubbled" letter).
Is This Right?
![20150224_083618.jpg](/proxy/?url=https://content.instructables.com/F2S/MLEL/I6RSN7QV/F2SMLELI6RSN7QV.jpg&filename=20150224_083618.jpg)
When the book is laying flat the design will seem warped, but don't worry, it'll look right when finished
Folding
![20150224_083209.jpg](/proxy/?url=https://content.instructables.com/F51/Z63G/I6RSN6HZ/F51Z63GI6RSN6HZ.jpg&filename=20150224_083209.jpg)
![20150224_083227.jpg](/proxy/?url=https://content.instructables.com/FQI/XQU0/I6RSN6I2/FQIXQU0I6RSN6I2.jpg&filename=20150224_083227.jpg)
![20150224_083254.jpg](/proxy/?url=https://content.instructables.com/FPZ/ZNMW/I6RSN6K1/FPZZNMWI6RSN6K1.jpg&filename=20150224_083254.jpg)
Starting from the back of the book, begin folding pages at the mark.
Consistency
![20150224_083333.jpg](/proxy/?url=https://content.instructables.com/FMU/43YW/I6RSN6L9/FMU43YWI6RSN6L9.jpg&filename=20150224_083333.jpg)
Make sure to keep the folds consistent so when it is done, it will be a smooth transition
Keep Folding
![20150224_061248.jpg](/proxy/?url=https://content.instructables.com/FAU/1M3S/I6RSN6LI/FAU1M3SI6RSN6LI.jpg&filename=20150224_061248.jpg)
Until done... enjoy
TIP: Multiple Marks
![fold.jpg](/proxy/?url=https://content.instructables.com/FWU/MPHQ/I6RSNA5G/FWUMPHQI6RSNA5G.jpg&filename=fold.jpg)
If you have a design where there are multiple marks on one edge, you fold on alternating pages and repeat the pattern. (see picture)