Foam Rocket With Launcher

Hi, in this tutorial i want show you how you build a rocket from a swim noodle and

a Rocket launcher from a Pango.

Tools:

Hot Glue Gun

Dremel Tool

Hobby Knife

Cable Duct "Drill"

Materials:

Pool Noodle

Pango

Cable Duct

The "Drill" is a jagged piece of cable duct.

Cut the Foam to the desired length and

dremel the tip to a round shape.

(in my case the length of a Nerf Titan Rocket)

Step 1

Cut a piece at the desired length of the noodle and cut lengthwise slices from it.

Step 2

Cutting triangles from the slices.

Take the previously cut piece of noodle (step 2) and cut 3 grooves for the tail fins.

Then drill the hole for the Rocket launcher in the middle of the body.

(Make sure that you do not drill too deep)

Hot Glue the tail fins in the Grooves.

The Rocket is ready, now comes the Rocket Launcher.

Take the Pango and glue the piece of cable duct on the nozzle as launcher tube.

Here is an older version of it for the Nerf Titan.

Nerf Titan Rocket