Foam Kunai

Today I will show you how to make this foam Kunai. It is soft but sturdy.

You will need:

-EVA foam

-PVA glue

-Dremel

-Foam tip brush

First you will need to cut a shape like this into your EVA foam.

Then cut a hole into the bottom of the Kunai.

Next you will need to dremel the sides of the blade and handle so they appear sharp.

Next you will need to apply PVA glue to the Kunai by a foam tip brush. Then leave for about 45 minutes.

Scrape of left over glue. You can also paint it.