Foam Board Lampshade

I made a lampshade out of a foam board. I Made this because i had a light that was laying around that didn't have anything covering it, and i also had some foam board laying around so i used it for a lampshade.

The Supplies that i used were:

1. Led light bulb
2. Foam board
3. Box cutter or exacto knife
4. Hot glue gun
5. Ruler
6. Pen

Get all of the supplies you need, and go to a space where you can build it.

The next step is to measure out a 3x3 inch square for the top and cut it out. Once you have the top cut out measure out 4 5.5x3 inch rectangles and cut them.

once you have all the sides and the top cut out cut out the designs with the exacto knife.

One of the final steps for making the lamp shade is to glue all of the pieces together with the hot glue gun.

And the final step it to put the lamp shade on the LED and admire your work