Flying Wolf Pistol Crossbow Mods
by petercd in Outside > Survival
8529 Views, 82 Favorites, 0 Comments
Flying Wolf Pistol Crossbow Mods
I decided to change the existing foot stirrup, which was a strange T bar shape which was fine if you're barefoot otherwise you need to use both feet, as well as add some sort of clip for holding the bolts/arrows.
First up was the stirrup which I made from a length of 5mm steel bar that was welded onto a tab of metal, making it easier to bolt onto the xbow, this was then wrapped with paracord.
The bolt clip was a strip of stainless steel, which is a fairly hard metal to work with, aluminium would be a lot easier, that was bent into a U shape and screwed into an existing hole the xbow. Holes were drilled into the metal strip which then had rubber grommets inserted that hold the arrow shafts.
First up was the stirrup which I made from a length of 5mm steel bar that was welded onto a tab of metal, making it easier to bolt onto the xbow, this was then wrapped with paracord.
The bolt clip was a strip of stainless steel, which is a fairly hard metal to work with, aluminium would be a lot easier, that was bent into a U shape and screwed into an existing hole the xbow. Holes were drilled into the metal strip which then had rubber grommets inserted that hold the arrow shafts.