Flying Paper Butterfly

Material Required:

Paper

1mm Iron wire

Elastic Rubber

Scissors, Sellotape, and plier

Bend the 150mm wire as shown in the picture.

Bend the 300mm wire as shown in the picture and bend its head.

Next, take the length as 5cm and bend the bottom legs.

Leave a hook on bottom and cut any unwanted length.

Take a piece of paper.

With a length as 5cm, draw shapes, and cut it.

Use Sellotape to paste the pieces as shown in the pic.

Put the elastic rubber through-hole and connect it to the hook.

Your Flying butterfly is ready.

Now Rotate its head and release it into the air or put inside a book. Enjoy