Floppy Disk Bird Feeder

Make a bird-feeder using only 3 Floppy Disks, 12 Floppy Disk Labels (Or masking tape), Hot Glue and String.

Sorry this is so simplistic and has such terrible accompanying photos, I will edit it later.

~ Three floppy disks

~ Twelve floppy disk labels, or sticky tape (wide)

~ String

~ Hot Glue (Not strictly necessary if you like the look of it with tape. If I had used labels I wouldn't have used it except for attaching the string.).

~ Scissors

Put sticky tape or the disk labels around both edges of the bottom of the disk equally.

Pry off the sliding metal bit on top of the disk and then carefully pry it apart on the top 3 sides.
Take the cotton off of the disk surface and then keep it for nesting material as well as the plastic disk in the middle for another project.

Cut a door in one of your disk sides like illustrated in the picture.

Assemble the bird feeder by taping the walls together or you could choose to glue it.

Untape each section and hot glue the connections to the disks touching it.

Just grab some hot glue and glue the string to the top.

Put the cotton in the feeder from the disks and then maybe a little seed and hang in the garden somewhere.