Flip Teleprompter

by clintbradford in Circuits > Apple

5694 Views, 15 Favorites, 0 Comments

Flip Teleprompter

001.jpg
003.jpg
004.jpg
005.jpg
006.jpg
007.jpg
008.jpg
009.jpg
010.jpg
011.jpg
012.jpg
013.jpg
014.jpg
015.jpg
I found great teleprompter software for the Apple iPhone / ipod touch ... but the commercial brackets seemed, well, like overkill for what I wanted: a teleprompter just for my new Flip UltraHD.

Here are plans for making a teleprompter for your Flip - or other small video camera. The software is from Bodelin Technologies at the Apple App Store.

Updates will be posted at ...

http://tinyurl.com/flip-prompter

Clint Bradford

Most of the Parts ...

002.jpg

The Bracket

003.jpg
Available at BestBuy (Dynex brand) or RitxCamera.com (Smith Victor brand).

Bookend ...

004.jpg
Staples has these 5" black metal bookends.

Position and Drill ...

005.jpg
Align the bookend edge so the Flip fits right to where the flash bracket starts to angle.

1/4" Hole ...

006.jpg
Drill a 1/4" hole in the bookend to accommodate the tripod mount screw.

Replace Washer ...

007.jpg
Use the thin washer that comes with the bracket.

Sticky Tape and Velcro(r)

008.jpg
Add a layer of double-sided stick tape between the bottom of the bookend and the top of the bracket. Makes it all more sturdy. The inch-long piece of Velcro(r) loop to the left is just to create a flat surface for the Flip to mount to.

Mount the Flip

009.jpg
The Flip mounted to the bracket. Note the Velcro(r) hook added to parts of the bookend ...

Add Velcro(r) to the Touch

010.jpg
Adding Velcro(r) loop to the back of a hard plastic case on the iPod touch - in this case (pun intended), an Agent18 case.

Attach the Touch

011.jpg
And here's both the Flip and the touch mounted solidly to your bracet.

Add Lighting.

012.jpg
A little added illumination never hurts. From BestBuy, this Dynex DX-VIDLT suits the project. But it's only powered by two AAA alkaline cells. Surely we can improve THAT, can't we?

Alligator Clips to the Rescue!

013.jpg
So that I can use the light in its original state later on, I just used alligator clips on the positive and negative battery contacts ...

Void My Warranty HERE ...

014.jpg
Trim a notch in the battery cover for the new leads.

Radio Shack AA Case.

015.jpg
I soldered the leads directly to the battery contacts in this Radio Shack 2XAA case, instead of splicing. Just made it cleaner.

More Velcro(r) ...

016.jpg
New AA case mounts to the bookend. Where would this society be without Velcro(r) and double-sided sticky tape???

You Are Done!

017.jpg
Your completed Flip 'Prompter! The software for your iPhone or iPod touch is "ProPromoter" from Bodelin Technologies. Available in Apple's App Sore for $9.95 - and is well worth the investment if you want to make yourself - or your subjects - look more professional.

Rear View.

018.jpg
View from the rear. Why didn't I whack off the "tongue" of the bookend? 'Cause I though i might mount something there in the future.