Flat Security System With GSM Alarm
by Mirio46x in Circuits > Sensors
7220 Views, 26 Favorites, 0 Comments
Flat Security System With GSM Alarm
Hello,
i would like to build flat alarm with gsm calling warning to my mobile phone. I read some topic about alarm working this way, but i could not find this concrete schema.
My components:
1.) Building kit of Alarm station http://www.sos.sk/?str=371&artnum=9627
2.) Motion senzor PIR lx 39 http://www.emos.sk/zbozi/1454001100-pohybove-cidlo-%28pir%29-lx39-biele
3.) Mobile GSM phone (Nokia 6310)
4.) Mobile charger.
The alarm should work:
Motion senzor gives the signal when the flat will be disturbed. The signal goes through the alarm station to phone, and then make quick call to warn me on my mobile phone.
Alarm station i want to use like a timer (delay) to set the necessary time while i turn on the alarm system and leave the flat.
In the next step (upgrade) i would like to connect small camera with internal memory, which would be activated by motion senzor at a time it make the quick call.
But my question is: Is my schema of alarm going to work?
I need the help, electricity is not my strongpoint, but i can put it together.
Thank you for any comment and helps.
Hope admin wont delete my topic.
Mirio46x
i would like to build flat alarm with gsm calling warning to my mobile phone. I read some topic about alarm working this way, but i could not find this concrete schema.
My components:
1.) Building kit of Alarm station http://www.sos.sk/?str=371&artnum=9627
2.) Motion senzor PIR lx 39 http://www.emos.sk/zbozi/1454001100-pohybove-cidlo-%28pir%29-lx39-biele
3.) Mobile GSM phone (Nokia 6310)
4.) Mobile charger.
The alarm should work:
Motion senzor gives the signal when the flat will be disturbed. The signal goes through the alarm station to phone, and then make quick call to warn me on my mobile phone.
Alarm station i want to use like a timer (delay) to set the necessary time while i turn on the alarm system and leave the flat.
In the next step (upgrade) i would like to connect small camera with internal memory, which would be activated by motion senzor at a time it make the quick call.
But my question is: Is my schema of alarm going to work?
I need the help, electricity is not my strongpoint, but i can put it together.
Thank you for any comment and helps.
Hope admin wont delete my topic.
Mirio46x