Flat Pack Pillow.

This instructable shows you how to make a flat pack pillow. Easy to take with you anywhere!

• First make a paper template to draw the shape on the polypropylene.
• Cut out the red outline.
• Make an incision, so don't cut through the material, on the black lines and fold the lines.
• Make little holes with the puncher to avoid a rupture.
• Then it's time to attach the press studs.
  • To see how it's done, check the video.

And the polypropylene part is ready!

• Again make a paper template of the shape.
• Draw the shape 2 times on the foam.
• Cut it out.

• Draw the shape on the fabric you have choosen.
• Cut out the shape, but cut 2cm next to the line so you have space to stitch.
• Stitch the fabric on one side (when the fabric is inside out).
• Turn the fabric right side out.
• Stitch the lines that will make the distinction for the foam.
• Attach the press studs.
  • To see how it's done, check the video from step 2.

• Slide the foam in the fabric.
• Finally, sew the remaining sides manually.

• First close all press studs of the polypropylene.
• Second step, close the press studs on the fabric.
• Slide the fabric over the polypropylene.