Flat Packed Desk Microphone
Here's an instructable on how to make my Flat Pack Desk Microphone.
You're Going to Need These Items.
➡️1 Polystyrene plate 200x200 mm
➡️Black "gewebeband" (tessa)
➡️A microphone similar to the Trust Desk Microphone (or better)
➡️Scissors
➡️Lasercutter
Strip the Microphone Until Only the Cable and the Diaphragm Remain.
Download the PDF File.
Downloads
Use the File to Lasercut the Shapes Out of the 2 Mm Poly Styrene Plate.
Attach the Loose Parts From the First Shape Together With the Black Tape.
Plug the Diaphragm Into the Hole, It Should Be a Tight Fit. Don't Forget to Seal It With Some Black Tape!
Your Flat Packed Desk Microphone Is Ready!
