Flash Light Holder

this is an easy way to make a flashlight holder that you can use to hold a flashlight on your head

this is what you need 
(you will also need a twist tie)

take the clip off the flashlight if it has one

cut out pieces of duct tape as long as the handle and roll them onto the handle sticky side up

roll on pieces of tape sticky side down onto the tape

put zip ties under the flash light and tighten them. Then you cut off the ends 

you can only do this if the flashlight has a hole in the back  

cut out the tape and put it on the flashlight holder covering the zip ties

put a twist tie through the hole. 
cut out a piece of tape.
start to roll on a piece of tape.
fold over the end. 
finish rolling on the tape. 

Finished
If you have any questions leave me a comment. 
please vote for me if you like it.