Flash Diffusor/bouncer an Another Way

Today my friend Juraj wanted to have a diffuse flash light for taking portraits/close ups - shadowless. Well, I made it for him in 1hour time.

Plexiglass 4 mm. White. And an already familiar tool. He wanted that plate have 12 x 12 cm square and holder 6x6cm. OK. No problem.

Edges should be rounded - delicate photographic fingers...

I took a transparent plexiglass (scrap) 5mm thick and made two pieces with hole 4mm. Take a screw and wing nut and all glued on white squares. So far so good.

So. Well done. It is adjustable at any angle, firmly. Finito.

Flash under. Diffuser / bouncer above. Only one strap. (but you use over 10 pc's if you like, :))

Yes, this is front look. Angle can be up ...or...down... :)

The same look as rubber straps step, but, very important, from better angle. :)))

Well, my son Fran wanted this also and he made drawing of new look. And I have to assemble this according his wish. Two long holes for future strap, double hinge, and replaceble diffuser/bouncer from two different materials.

Well, now it wait proper strap. Now, he can bounce flash light, direct in another direction, fully close and fire through.... different materials...and so on.
Costs? 1 hour work, plexiglass scrap, screw, nut, glue..good will and 10 cents.
Sincerely,
Kresimir