Fixperts -Wheelchair to Stroller Connector

by tamirkeidar in Living > Kids

84 Views, 2 Favorites, 0 Comments

Fixperts -Wheelchair to Stroller Connector

1.png

This is a connector used to connect a wheelchair to a stroller made for Ola MELAMED, as part of the Fixperts course at the HIT Design Faculty.


This accessory helps Ola move freely with her stroller in public

spaces, and we hope it can help you too.


We designed two options for the stroller connector.

An option to print the entire stroller connector.

A strong option but will last less time.

It is recommended to print with 80% fill, PETG CF

And another stronger option that will last a long time when combined with printing and aluminum.


Fixpartner: Ola MELAMED.

Students:Nimrod Shani , Tamir Keidar.

Fixperts course, instructed by Prof. Gad Charny and Dana Yichye Shwachman.

HIT, Industrial-Product Design B.A.

Supplies

2.png
3.png
5.png

Laser Cutting Aluminum 3mm

3D Printing - PETG CF

Tube Bender - Aluminum Diameter 22mm pip

Hex Allen Key 3M and 5M

Fits Bugaboo Cameleon 3 stroller

4.png

Option 1 of 2 to print the entire connector of the baby stroller.

Strong option but will last less time.

Recommended to print at 80% fill, PETG CF

Instructions and Assembly

8.png

Aluminum cutting parts 3 MM

7.png

print with 80% fill, PETG CF

11.png
20.png
9.png

Aluminum tube 22mm diameter, 18 mm diameter dowel.

6.png

Buy the connector through the company website

https://rgkwheelchairs.com/wheelchairs/power-solutions/triride.html

10.png

https://www.mcmaster.com/92148A170/

https://www.mcmaster.com/90576A104/

https://www.mcmaster.com/92125A141/

https://www.mcmaster.com/92125A222/

https://www.mcmaster.com/92148A150/

https://www.mcmaster.com/90576A102/

12.png

14.png
13.png

15.png
16.png

17.png
18.png

19.png

21.png

22.png

23.png

24.png

25.png

26.png