Bluetooth Speaker for Your BFF Birthday Gift

Hi guys I'm Burak. I'm writing this project from Turkey. In this project I'll show you how to make the speaker box from Glass box. I made this project for my Best Friend birthday. I hope you will understand and comment.


This project is not as difficult as it seems but not easy either ;). You can supply materials easily from home. Of course, except for a few electronic pieces.

First you had to choose your box. the box dimensions may vary. what is important is what you want. If you decide to do this, box selection will be easy.

Rings are provided near the speakers. First drawing the place with the pen. Then cut the parts with the knife. If you open the box when cutting, you can make it more comfortable.

paste the speakers with a solid adhesive. if there are gaps. You can patch it like the next step.

Cut before the rounds. Cut and paste on spaces.

This is the hardest and most important step. It's actually very simple, but if you don't do this step, it's will be destroyed.

Firstly close up the box. Then stack the supports for the bottom side. There are a total of four for the top wings.

You can get 12v by connecting the batteries in series. Car charger in parallel with 12V.

I hope you like the project. Do not forget to comment