Fishtail Rubber Band Bracelet

by ehauss in Craft > Jewelry

5410 Views, 22 Favorites, 0 Comments

Fishtail Rubber Band Bracelet

14, 2:47 PM.jpg

Items Needed

14, 2:47 PM.jpg
14, 2:47 PM.jpg
- loom
-rubber bands
- c-clips
- loom stick
;) have fun!!

Starting Your Bracelet

14, 2:47 PM.jpg
Make a infinity sign or a 8 and place it on your loom

14, 2:47 PM.jpg
14, 2:47 PM.jpg
Put a different color of your chose on top of the 8 or infinity sign and then do one more on top of that color

14, 2:47 PM.jpg
14, 2:47 PM.jpg
Now u will need to get your loom stick and grab 1 of the bottom rubber bands sides and put it on top and do the same with the other side of the bottom rubber band

14, 2:47 PM.jpg
You will now put a color of chose on top of your other rubber band


!-tip- you will always have 3 rubber bands on your loom

14, 2:47 PM.jpg
Grab the bottom bands and bring it to the top

14, 2:47 PM.jpg
Continue this process until a desired length that should fit u !¡!¡

Preparing to Put C-clip On

14, 2:47 PM.jpg
14, 2:47 PM.jpg
Now u will need to put your finger on the top and bottom of your bracelet and then u will need to pull out the two rubber bands that are there

Putting C-clip on

14, 2:47 PM.jpg
Get c-clip ready and put it through the holes on both sides of your bracelet

Finished Product

14, 2:47 PM.jpg
14, 2:48 PM.jpg
Now you will be able to wear your bracelet

14, 2:53 PM.jpg
Make as much more as you want and have fun:)