Fish Spear

4 prong fish spear, easy to make.

Straight sapling about as tall as the person using it around 6-7cm diameter. twine. strong, sharp knife. 9cm long spreader sticks.

Choose a tall, straight sapling 6-7cm diameter. cut the end of so its flat.

Make a split down the middle by hitting your knife down with something hard, then make another split making the end into quarters.

Wrap twine around the sapling 15cm down the splits you have already made. Finishing the split up to the lashing.

Carve to small sticks just longer than the width of the sapling.

Slide the spreaders one at a time through the splits down to the twine.

Wrap twine around the spreader sticks in a figure of eight, holding them down.

Sharpen all four ends of the prongs until they are very sharp and pointy.

by the end it should look something like this.