FirstFly - Hand Noise Sounds

-FirstFly-
It's a glove with a mini-LDR on the fingertips that are connected to a circuit and an amplifier. Different sounds are produced acording to hands and fingers movements due to light incidence on mini-LDR sensor. More light produce higher pitch sounds, less light produce lower pitch sounds.
So -FistFly- is a fun to play instrument because it is a mix of sound and physical performance.
* FirstFly connected to guitar pedals. LIVE software and PURE DATA software can increase the sound performance.
Downloads

- Schematic drawing FirstFly circuit -
ELECTRONIC COMPONENTS :
40106 IC (integrated circuit) - 1 unit
LDR (Light Dependent Resistor) - 5 unit
Resistor 10k - 5 unit
Capacitor 100nF - 5 unit
Mini Breadboard or Perma-Proto - 1 unit
1 4" Mono Female Input Jack Socket Plug - 1 unit
Mini switch ON/OFF - 1 unit
Connector for battery 9V - 1 unit
Unshielded twisted pair cable with five pairs - 1m

One Glove knitted with cotton yarn to facilitate the passage of
Unshielded twisted pair cable with five pairs until your fingertips
that will connect the mini-LDR.

Plastic, wooden or MDF box to encase control circuits.
Suggested dimensions 10x10x5 cm.