How to Make Firesticks

I wanted a compact way of having a fire starter helper. Damp or wet wood is a lot harder to get started. With these Fire Sticks, you will be able to use the fire from these sticks to dry out your wood so that it can then be used to build a larger fire.

Burning Candle
Vasoline
Wooden Skewer
Pliers
3 Cotton Balls
1 Thick Strong Straw (Wendy's )

Spin your straw about 2 inches above the flame of the candle flame. Let the heat, not the flame, begin to melt one end of the straw. Quickly take your pliers and crimp the end of the straw. I usually do this step a few times to make sure I get a very good seal.

Find the end of the cotton ball or push the center of the ball out to get this started. Once unrolled, pull or stretch the cotton about 1/4 inch every inch. The idea here is to thin our the thickness of the cotton strip. Another option is to pull apart the roll every inch for preparation for the next step.

Take the skewer and dip the flat end into the vaseline and get snuff a pea size amount on the tip. Take end of the cotton roll and use the tip of the skewer to start pushing the cotton into the straw. Push about an inch into the straw and then redip the skewer into the vaseline and push in the next inch of the roll. After each roll, or piece, pack the cotton to the bottom of the straw as tightly as possible. Note: Depending on the straw that you are using, you should be able to fit 3 cotton balls per straw. Also, leave at least 1/2 inch empty in the straw.

Follow the same steps as before to close the end of the straw. Take a little time to clean the end of the straw of vaseline before melting.

Each straw will provide 3 fire straws. Simply cut about 1/3 of the straw off, pull out a little cotton. Stick the closed end into the ground or at least upright. Light the open end of the stick and then start laying your kenneling around the flame.
You should also seal the open end of the unused portion of your straw for future use.