Fingerboard Skatepark

It is really easy to make a DIY fingerboard! This step by step guide will show you how to make a simple fingerboard skatepark.

Materials for this project are:

Tape

Scissors

A piece of paper

Cardboard

So all you need to make a quarter pipe is to cut out a piece of paper and tape it to your cardboard box from the top and bottom. This will be a good starting obstacle for your skatepark!

To make a handrail, you can use a cardboard piece cut into a handrail, or you could use an actual metal bar. Then, tape the rail into your skatepark.

So for this one you can basically add anything you want! I added a manual pad, a very small stair set, and a weird curved rail on the wall.

Finally, you can enjoy your DIY fingerboard skatepark!