Find Your TV Watching Habits

Every month we are paying high bills for TV package rentals. But we don't have any idea how many channels are we actually watching. Even we don't have any Idea how many hours we are spending to watch TV.

Here I have built a data logger which will store your TV watching patterns.

With this You can

Track which channel you are watching most and which are you not. You can drop the unwanted channels and save some money
How much time your kids are watching on your back and which channels are they watching
How many hours you are spending by watching TV, etc.

Material Required

You need following material to complete the Project

1 X Arduino Uno / Mega
1 X RTC module 1307
1 X microSD card Module
1 X Micro SD card
1 X Coin Cell
1 X TSOP1738 IR receiver
1 X LED (optional)
2 X 470 Ohm Resistor
Jumper cables
Small Veroboard
USB power in Cable / 9V adapter

Tools and Software Required

Arduino IDE
MS Excel
Soldering Iron
Hacksaw
Hot Glue Gun
Suitable cabinet to hold the project
Screwdriver

Schematic Diagram

Please find the Schematic Diagram in image

IR Protocol

We need the following library to execute the project

IR Library
SD card library.
RTC Library

First We need to understand our Set Box Box IR protocol. To find this upload the example code from IR library. Screenshot attached
After executing We need to found which protocol are using
For My case I am little bit unlucky
I found unknown code
Then I have take a log for all 36 bit data received and make a code working for me.
I analysed the data and found only 4 bits are changing and that are the key of data.

Arduino Code

I have briefed the code in INO file and video. Basic algorithm is

IR decoding
IR key value
take current Time from RTC
Combine the data and store in SD card

library links

https://github.com/adafruit/RTClib // RTC library

https://github.com/z3t0/Arduino-IRremote // IR library

Downloads

TV_watching_habbits.ino

LOG Analysis

We have got the file in csv format. Steps to analysis

We need to understand our STB logic. My STB use 3 digit of channel no and channel are like 100, 703,707 202 etc. Timeout of key pressed is 3 seconds. There are three way to change the channel
- By pressing direct channel no
- By pressing Channel + and Channel - button
- By pressing Swap button to get previously watched channel
As Micro controller is not capable to analyse this whole conditions in between it. I have analysed the data on excel. I used Arduino to store the remote pressing log
Please watch the video to get full understanding.

Downloads

Analysis.xls

Video of the Project