Fidget Spinner Made From a PVC Pipe

Whether you like it or not, Fidget Spinners are very popular at the moment. Some people use it as a toy, others to relieve stress.

If you want to make your own fidget spinner, this Instructable will show you one way to do it.

We will make a Fidget Spinner from a PVC pipe.

What's needed:

• 25MM PVC pipe
• 608 Bearing
• 2 x Glass Marbles

If you are Interested in the video version of this Instructable and the embedded video does not appear on your mobile device, here is an alternative link

I cut off a piece of PVC pipe.

Then I heated it up with a blowtorch.

Make sure to wear a respirator when heating PVC

When it was heated, I flattened it with a wooden board.

Then I drilled holes for marbles and a hole for a bearing.

Holes for the marbles should be smaller than the marble's diameter.

I also trimmed the pipe to desired shape and drilled decorative holes.

I reheated ends of the pipe, so they would open.

I inserted the marbles and half-closed the ends.

Make sure that the marbles turn freely (unless you don't want them to)

Then I put in the bearing

That's it!

Your Fidget spinner is ready!