Fence Post Puller With T-post Driver Hammering
by Human living in Living > Gardening
83 Views, 0 Favorites, 0 Comments
Fence Post Puller With T-post Driver Hammering
If you don’t have a t-post puller for metal posts you don’t have to buy an expensive puller from the store. Just use the t-post driver as a hammer to pull it up. No other expensive tool needed. I hope this saves people time and money.
Slide T-post Driver Handle Over T-post
Slide the t-post driver down the t-post, between one of the t-post driver handles and the body of the t-post driver.
Wedge Handle Under T-post Notch
Make sure the handle is on the notched side of the t-post and the body of the t-post driver is on the opposite smooth side, wedge the handle under the notch.
Hammer the T-post Up and Remove
Then hammer up on the post. The t-post will become very tightly pinched between the handle and body of the t-post driver, with the protruding notch preventing the driver from sliding up the t-post. Beat upward on the notch like you’re curling the post driver. As you hammer up, keep sliding down a notch, until the post is out of the ground.