Felt Bear

There are a person good at sewing and a weak person.

I thought if anyone could let a thread go through equally that I was glad, and made it with a laser cutting machine.

The point of the data making...

1.
When I process felt, limit width occurs around 1.5mm(In the case of felt of 2mm).
So, it is necessary to offset a pass 0.75mm beforehand.

2.
I make a dashed line from the pass which offset in the 0.5mm inside.

Process ​​by using a laser cutting machine.

The felt to process with a laser cutting machine has good thing of 100% of polyester.

I was able to sew straight it with equal distance when I put a thread in conformity to the hole which a machine opened.