Fates
![CZ{L_A_K9N[59{%]U`V$K{B.png](/proxy/?url=https://content.instructables.com/F93/GCNW/K26E7S8M/F93GCNWK26E7S8M.png&filename=CZ{L_A_K9N[59{%]U`V$K{B.png)
NU@CE)[96($M`XH1V.png)
For skaters, skateboarding is their soul. Because they love skateboarding, they may get hurt, but skateboarding is their own life. When I step on the skateboard, when I step on the skateboard. This is the desire for freedom, the control of one's own destiny. So I named the fate of this skateboard
Build a Lower Surface of the Skateboard
2NLMFQYPQY)MMH[B{28TO0.png)
First sketch the lower surface, then build the solid.
Draw the Corresponding Upper Surface and Edge.
![7W(LVZ]WY7[)B7BC[5CY3}V.png](/proxy/?url=https://content.instructables.com/F01/LK8T/K26E7R4F/F01LK8TK26E7R4F.png&filename=7W(LVZ]WY7[)B7BC[5CY3}V.png)
![~%F]TMHJS3XCAWME8N{NPVT.png](/proxy/?url=https://content.instructables.com/F3C/P4VM/K26E7R4H/F3CP4VMK26E7R4H.png&filename=~%F]TMHJS3XCAWME8N{NPVT.png)
绘制相应的上表面和边缘部分，将上表面分为三个部分，然后依次绘制草图。对应于施工实体。
Draw a Bracket
Draw the bracket. The bracket is composed of two parts, one is made of cylinder, the other is made of trapezoid. At the same time, the edge of trapezoid becomes more smooth.
Making Wheels
![]0BGLSEOJYKMP(68YLFFLFX.png](/proxy/?url=https://content.instructables.com/FN2/28KT/K26E7RWK/FN228KTK26E7RWK.png&filename=]0BGLSEOJYKMP(68YLFFLFX.png)
![_2QDWCD1P6ARW4B7()]TY$F.png](/proxy/?url=https://content.instructables.com/FS7/A0RY/K26E7RXE/FS7A0RYK26E7RXE.png&filename=_2QDWCD1P6ARW4B7()]TY$F.png)
4OS[SU262`H81%I.png)
The wheel is composed of three parts. The wheel is divided into the left half and the right half. Then connect it with a screw.