Fashionable Headband Tutorial

Prepare the following materials and tools:
Metal frame headband
Golden wire "Ø about 0.5 mm"
White pearls "Ø about 0.6 cm."
Small white beads
Golden ribbon "about 50 cm."
1 Jump ring "Ø about 0.6 cm"
Headpins
Silver spacers
Thin silver Chain
Small golden pendant
Round nose pliers
Flat nose pliers
Needle
Transparent thread

Wrap the golden wire onto the headband tightly about 4 rounds. Use the flat nose pliers to press on the wrapped wire. Slide in a pearl in the 5th round and then make again 4 wire rounds over the Headband.

Repeat the steps until you have enough of the pearls wrapped. Leave a space then start wrapping again onto the headband until you reach the end.

Use the golden ribbon and make a bow. Sew it strongly using the needle & transparent thread and settle the bow at the left empty space of the headband. Sew the small ribbon piece over the bow & headband together tightly.

On your head pins, slide in 1 metal spacer, 1 pearl & 1 small bead then make up a loop at the end of the head pin with the round nose pliers. Make 3 sets.

Cut a few centimeters of the thin chain & attach the pined pearl with spacer at one end of the chain.

Take a jump ring and attach the 2 pined pearls and the chain and attach to the bow. You're done! Hope you like it!

A more detailed step by step tutorial is available and you can download it for FREE HERE.