Fallout Nuka Cola Quantum Light

In this instructable i will show you step by step on how to make a nuka cola quatum light

the first thing is i mixed up some concrete a lot thicker than the one pictured then i put it down on a piece of wood then i made a makeshift mould and used the glass bottle to make a indent after 12 hours i removed the makeshift mould and left to dry for a further 12 hours then removed from the base piece of wood.

then i mixed up some rust with water and painted on the concrete and waited until it has dried then added a clear coat to the rust to stop it frpm rubbing off

I sanded down the bottle caps to get the paint of then i cut out the bottlecap labels then added a cote of clear cote to seal them

first take the label of them bottle mine was easy just a plastic label then i printed of a label glued it onto the bottle and gave it a coat of clear coat next i filled the bottle up with water and added blue food colouring to it

i soldered part of an led strip to a 12v power source then glued the strip to the bottom of the bottle then i glued all the bullet and the bottle caps to the base(this first picture is an picture from earlier in the processes.

now just sit back and look at your cool new lamp