FairPhone 1 Case

The design is a maximal simple FairPhone 1 casing.

Advantages:

-There are no holes in the buttom part which is covered by the aluminium casing, so you can remove the aluminium casing of the FairPhone and thus economize weight!!!

-Print it with flex material, then sandpaper it to obtain a soft surface.

-Presss the buttoms right through the casing!!!

-It has a flat bottom to avoid wobbling.

Happy Printing! Happy FairPhoning!

The design is a maximal simple FairPhone 1 casing.

Advantages:

-There are no holes in the buttom part which is covered by the aluminium casing, so you can remove the aluminium casing of the FairPhone and thus economize weight!!!

-Print it with flexible PLA material, then sandpaper it to obtain a soft surface.

-Presss the buttoms right through the casing!!!

-It has a flat bottom to avoid wobbling.

Happy FairPhoning!

First step:

Choose a flexible PLA material, and 3D-print the case.

Sandaper the outer part with a fine grain sandpaper to obtain a soft and smooth surface.

The inner part of the print has only to be cleaned a bit, in case there are irregularities in the print.

To economize weight, with this case design you don`t need the aluminium casing.

Remove the aluminium casing on the backside of the phone, and slip the phone in the casing.

Done! Happy Fairphoning!