FRANKENSTEIN CAMP BUCKET LIGHT

by J_SMITH1024 in Outside > Backyard

195 Views, 1 Favorites, 0 Comments

FRANKENSTEIN CAMP BUCKET LIGHT

thumbnail_image2.jpg
thumbnail_image3.jpg
thumbnail_image4.jpg
thumbnail_image0.jpg
thumbnail_image1.jpg

BUCKET

I USED A 5 GALLON BUCKET FROM MENARDS AND LACQUER THINNER TO REMOVE ALL WORDING ON BUCKET. I BOUGHT THE LID FROM HOME DEPOT--THE ONLY PLACE I COULD FIND WITH A BLACK LID. AFTER MASKING OFF THE SURFACE, PAINTED THE TOP RIM BLACK WITH SPRAY PAINT.

FACE

CREATE A FACE--THE MOST DIFFICULT PART WAS GETTING THE RATIOS OF THE FACE, HAIR, AND EARS CORRECT--PRACTICED WITH PAPER UNTIL IT LOOKED RIGHT. CUT IT OUT WITH A VINYL CUTTER AND APPLIED TO BUCKET.

NECK BOLTS

RUMMAGED AROUND AND FOUND A COUPLE OF OLD ROLLERS AND ATTACHED USING A BOLT AND WING NUT TO THE SIDES. MOST ANYTHING WOULD WORK--SPOOLS, ACTUAL BOLTS....

LIGHT

INSERTED AN LED PUCK LIGHT WITH REMOTE INTO BUCKET AND USED THE WHITE LIGHT SETTING.

I HAVE ALSO MADE SOME BUCKET LIGHTS WITH DIFFERENT SCENES--CEMETERY, BATS, AND JACK-O-LANTERNS AND HAVE TRIED WHITE BUCKETS USING THE DIFFERENT COLORS OF THE PUCK LIGHT AND IT WORKS FAIRLY WELL.

Supplies

5 GALLON BUCKET WITH LID (MENARDS AND HOME DEPOT)

BLACK PAINT FOR TOP PART OF BUCKET

VINYL SHEET FOR FACE, HAIR, EARS, AND SCAR

ROLLER, TUBE, BOLT, WASHER FOR NECK BOLTS

LED PUCK LIGHT WITH REMOTE (AMAZON)