FLYING BAT
Original source: https://www.instructables.com/FLAPPY-PAPER-BAT/
This project is installation art. It is a bat that can swing its wings at first, after the improvement on the machine, I add two eyes that can shine red light. The light can make the bat look better and fashionable.
Materials:
1. Arduino Leonardo
2. Breadboard
3. Wires
4. Red LED
5. Resistor
6. Crocodile clip
7. Motor
8. Paper (it will be better if you use thicker paper)
9. String (it will be better if you use rough string)
10. Scissor
11. Box
Step 1: Set Up
Steps 2: Coding
Step 3: Cut the Bat
Make sure the light ball can go through the hole on the eyes.
Make sure the string can go through the small hole on the wings.
Step 4: Tie the String
Step 5: Put in the Box
Step 6: Finish
