FIX a BROKEN DTV CONVERTER BOX(APEX)

if you box does not respond or light is blinking, you have a power problem.
you need to replace a single capacitor on power supply board.
you will need :
a Philips #2 screw driver
a soldering gun
basic soldering skills

you will need to remove all screws (7-8) from the box cover.

you will need to replace the capacitor marked with an arrow.
you can use a higher voltage rating caps and up to 100UF higher.

disconnect all cables  and remove the 2 screws holding the board.

print this pdf if need the photos