Eyeglasses Stand V2
Hi All,
I introduced wood-working to kids with my last version,
We faced a few issues as below
- Too much cutting
- Not stable to stand
- Sometimes may tip over due to weight distribution
In this version, we have simplified the design, and made it more stable
Hope you like it
What Do We Need ?
- 4mm Plywood
- Jigsaw
- Sandpaper 80, 180, 220 grit
- Acrylic paint
- Varnish
- Wood Glue
- Template
Template
- I have created a template
- Download and print on a page size "letter"
- Note that the base is 10cm long
Cutting
- Stick the template on a 4mm plywood
- Using a jigsaw or hand saw cut each piece
Assembly
- Using PVA glue or fevicol, glue the front, back, and legs as shown
- Glue the nose in place
Finishing
- Sand plywood with 80, 180 and 220 grit papers
- Paint the stand with white acrylic paint as base and highlights with grey and black
- Draw the eyes and nose
- Varnish it or apply a clear coat
- We are done, place your glasses on it and adore the beauty