Eye Glasses Wall Hanger

while rebuilding my house , i have time to recycle some of the leftover materials. I hate to trash good scraps. I have made all sorts of hangers and holders out of house electrical wire. My latest idea has been very useful around the house.

this hanger for eye glasses works well because of its . . .

1. simple design & easily made

2. recycle electrical wire scrap materials

3. keeps a space between all hanging glasses

4. plastic coated wire wont scratch the glasses

5. can mount eye glass hanger on any wall or flat surface

6. flexable wire will give a little if glasses are pulled off the hanger to quickly

19 inches of 14 gauge house wire

needle nose pliers

2 screws

Shape the wire like so using the needle nose plyers . Begin by bending a tight circle notch for left screw , then proceed to make 4 square like hanger loops. Make a final tight circle notch for the right screw and cut off any excess wire at the end , attach the wire to a flat wall surface using 2 screws.

Push the 4 wire loops upward to 45 degrees away from the wall.