Extremely Easy Sparker
Have you ever wanted a spark to ignite your pyrotechnics but were worried about them blowing up in your face. If the answer is yes, then search no more.
Parts list
Empty/full lighter
2ft wire
Tools
Glue gun
Sharp knife
Hacksaw
Wire strippers
Dismantling the Lighter
Unscrew it and remove fuel lines and fuel tank. And then look at the photo.
Gluing
Just follow the pictures.
Attaching Longer Wire
Strip the ends and connect one to one and one to one, tape connections separately.
Finishing Up
Put it all back together. To use, strip 1mm off the end of the wire and arrange 2mm apart and pull the trigger. Feel free to comment.