Extra Kitchen Lights
Today, I am going to show you how I illuminate my kitchen with power led extra. When power cut is happened, there are 2200mAh batteries with me to put my kitchen to illuminate. So, I don't need to live in dark side of life with this project. In general, our kitchens have only one point illumination, and this is usually on the top of kitchen. When it is night, you can only see your shadow on your kitchen countertops that I dislike this. I needed to see the countertops but it was dark. In brief, with this project, I made an innovation in my kitchen's illumination.
The need list:
- Hot silicon glue
- Soldering iron with solder
- Electrical tape
- Male DC power adapter
- Wire
- Old phone adapter with female usb out
- Male usb cable
- Power LEDs (Color: amber) (5-10 pieces up to your kitchen length)
- Female adapter pin
- Multimeter
- Nippers
Video Explanation
On this video, open English subtitle to understand the video.
Other Details
In my project, I only use 10 ohm Liket resistance in serial because my old adapter is below 5V it is approximately 4.25V. If you are not sure, you can use potentiometer to change the brightness.
.
That's all !
BONUS: Reading This Instructable
NOTE: This instructable's step is aimed for visually impaired people to hear the sentences to learn what's going on here. Watch the video, it explains all steps.