Explosive Knex Knife Thrower

A simple yet devestating close range knife thrower with exsplosive fragment rounds.


I made this when i built a model of a medieval magonel
when the arm flew off!!!

Well I bet everybody can figure this out in the picture

Just follow these simple pictures!

Use two durable thick rubberbands and wind them around towards the handle, then when the tension builds up add a yellow rod as shown.

To load clip a normal shot(no rings) or a exsplosive one (with rings) into the yellow connector. Then pull back the shot like cocking a gun the slip your finger off. If it does not fire try adding more rubberbands.

You can also clip a white rod on the yellow connector and put any slip any knex pieces with a hole and fire.

Please take a look

https://www.instructables.com/id/EVW12CKDK8EV2Z4COS/ Heavy crossbow

https://www.instructables.com/id/EV15SL4DFWEXCFMVSA/ Grenade

https://www.instructables.com/id/ECGX2R7W5NEV2Z4O0I/ Knex Crossbow

https://www.instructables.com/id/ED9JQ1UEUQEYSYVDH2/ Knex Uzi