Eternally Your Card

Here's the process of how to make a light up card.

Here's are the tools I had used

- 2 black paper

- White paper

- Tissues Paper

- cooper tape

- 2 LED Lights

- Exacto Knife

First, I fold the paper into half.

I cut out two small lines each sides for the little pop up window.

I got my pop up window. I glue the tissue paper on the small window.

I have made point for to make a parallel paper circuit. I start using cooper tape to connect the dots.

I include the LED light and the battery. I have made a tiny fold paper of the white paper as a switch.

I had placed the black paper over to cover the white paper, with the circuit inside. I also made a tiny cut piece and wrote on the card.

I had to glued two black card each side, with the white paper and the circuit inside.

I wrote more on the card with a silver color pencil. I tested to see if it light ups and it did light up.