Epoxy Pendant With a Druzy Quartz Look

This instructable will show you how easy it is to use mini crystal rhinestones to make a pretty pendant!☆

• mini aurora borealis rhinestones 1.2mm size ( approximately 1/4 teaspoon; which is a little more than you need).
• 1 silicon pendant mold ( any shape you choose).
• 1 gemstone or broken pieces of gemstones ( any size that is smaller than the inside your silicon mold).
• 2 part epoxy ( I used Gorilla glue epoxy).
• 1 toothpick ( to mix the epoxy).
• 1 small disposable container ( to mix the epoxy).

With the toothpick, mix your epoxy thoroughly for approximately 30 seconds inside a disposable container.

Pour the epoxy into the pendant mold; a little more than half of the way full ( leaving a space for the mini rhinestones, so the epoxy doesn't over flow out of the mold).
Place the mini aurora borealis rhinestones into pendant mold into the epoxy; before the epoxy dries. With your finger lightly tsp on top of the rhinestones. Let the epoxy dry for 30 minutes before moving on to step 4.

After at least 30 minutes, remove the dried epoxy from the mold ( There will be loose rhinestones on top of your pendant that will fall off, that's okay ). Your pendant is finished! Add a jewelry loop and attach the pendant to a chain or chord necklace. Wear or gift your creations! ☆

☆ Please share photos of your creations! ☆