Engraving Egyptian Hieroglyphs on Belt

Hello Makers.

In this Instructable we learn about Ancient Egyptian Language and Apply that around our Regulars product to learn it Easy Way.(Also Show off to Friends)

We can Engrave Ancient Egyptian language on the Leather Belt to Learn it faster.

Lets Collect all Supplies for making this project.

If you don’t have Laser Engraver Access Don't worry, You can make this project As easier than Other.

Let’s start making.

1> Leather Belt

2> Permanent marker

3> Laptop

4> Laser Engraver Access (Not mandatory)

1. After searching on the internet I found a relevant Image for our project.
2. I download images of comparison between English alphabet and similar in Egyptian Language. I attach that Image here for all makers' References.

Note: If you don’t have access to a laser engraver please Follow Step- 6.

1. I use Adobe Illustrator to Convert images to vectors .
2. You can use any software which supports this operation. Export .dxf file for laser engraving from your relevant software. Cross check your vector file by re-opening in the same software, ensure all lines are close and make boundaries.

1. I Engrave this Egyptian Language on my Belt(Too Fashionable in Public).
2. You can print your name in Egyptian Language on Belt, Badges, Name Plate, leather Bag, wallet, watch Belt, identity cards etc. Collect material and Set below Laser and Upload design.
3. Take Fresh Leather belt to Engrave Symbol on it.
4. For Example : My name is Dax Patel
5. I compare D, A, X Letter Compare with image and make engrave setup according it.

1. After setting up the Belt below Laser, upload your design and set Parameters as per your machine.
2. I have my own DIY laser engraver 2.5 W laser diode.
3. I put 15mm/s Speed and 35% Power for Proper Engraving on Leather Belt.
4. Check the boundary of design and ensure it’s inside the Engraving Area.
5. Start machine and Vacuum for Engraving.

1. After Complete Laser Engraving Take out the belt and Clean it with Wet tissue to clean burning material from the surface of Belt.
2. After cleaning your belt is ready to wear and showing off in public and your Friend.

Enjoy Making.

1. Take 1 print of my reference image attached here.
2. Write your name and draw the appropriate symbol below your name.
3. Draw those same drawings on your Belt with a Permanent marker.

Enjoy your making .