Elephant-Vac

Transform a vacuum cleaner into an elephant.

With this vacuum cleaner, you need no longer to vacuum by yourself!

Every visitor will beg to use it. Perhaps he even pays for it.

And you have enough time to read "Tom Sawyer" ;)

I made a frame out of wood that fits good but not perfect on the vac.

I covered the corners of the vac with aluminum foil and filled the corners with hot glue.

I glued more little boards on the frame to make a cage

On the back I removed a piece, so the cable can slip in.

I glued veneer strips on the cage with hot glue.

I tried my best, it should look like an elphant, but I am not very good in modelling.

The idea was, to turn the tusks to put the vac on and off.

Two long dowels go from the front to the back.

Guideways hold them in place.

A wooden finger on the dowels presses the button if the dowel turns.

The tusks were modeled on a band sander, finished by hand and glued on the dowels.

The skin was made with 3 layers of paper mache.

I didn't want flat feet. So, I covered a balloon with paper mache. After the glue was dry, I cut disks out and glued them on the feet.

The ears are made of 3 layers of paper.

To make the eyes, I put a drop of epoxy into a washer on black paper.

For some decorations, I printed colorful mandalas on my printer, cut it out and glued it on the elephant.

Instead of thousand words, please watch the video

If you use a mobile device, use this link .

If you like it, I am glad if you vote for it in the "HACK YOUR DAY CONTEST"

If you want to see more of my work, subscribe to my Youtube channel