Electromagnetic Generator

Today we are gonna be making a LED Generator. Off of scratch with the materials you have.

The Supplies: Wheel, Generator, Cardboard, LED Light, Tape, scissors, Phone to take pictures

- Have a about big rectangle cardboard to place your stuff.

- Attach your wheels to the motor, it will on the side of it, it should go right inside it.

- you would feel it when you spin the wheel, the motor will make some noise.

- The motor will 2 wires coming out of it, the red and black one.

- They will both have 2 little wire comming out of it from the end, where you gonna put the wire around the LED light.

- Make sure when you attach each wire, DO NOT MAKE THEM STICK TOGETHER. Or else they won´t work.

Look at the images to get what I am saying.

- First thing is you should do in the put the motor all the way to one end to make you have space for everything.

- Place it there and then stick with tape to place in steady so it won´t when you spin your wheel.

- then basically place some tape on the motor wire where the LED can also stay in place.

- Then make sure the Motor wire (red and Black one) are attach with the LED Light left hook and the right hook.

Again make sure they are not sticking together.

- That it you got spin the wheel and the LED light will go off.