Electric Penny Board V1

by argurvitch in Circuits > Gadgets

2018 Views, 10 Favorites, 0 Comments

Electric Penny Board V1

IMG_5070.JPG

this electric penny board is a prototype for a bugger skateboard

What You Will Need

Screen Shot 2017-12-07 at 10.02.12 AM.png
Screen Shot 2017-12-07 at 10.05.09 AM.png
Screen Shot 2017-12-07 at 10.04.17 AM.png
Screen Shot 2017-12-11 at 10.13.48 AM.png
Screen Shot 2017-12-07 at 10.05.30 AM.png
Screen Shot 2017-12-11 at 10.17.48 AM.png
Screen Shot 2017-12-07 at 10.02.45 AM.png
Screen Shot 2017-12-07 at 10.15.42 AM.png
  1. penny board
  2. lego 8881 battery box
  3. lego 8883-M motor
  4. 2 technic gear 40 tooth
  5. lego technic axle 8
  6. lego technic bushing stop
  7. 4 lego 68.8 x 36 weel rim
  8. any duct tape
  9. 6 AA batteries

Motor Setup

Screen Shot 2017-12-11 at 10.31.17 AM.png
  1. put AA batteries in lego 8881 battery box
  2. connect the lego 8881 battery box to the lego 8883-M motor

Gear Setup

Screen Shot 2017-12-12 at 10.01.23 AM.png
Screen Shot 2017-12-12 at 10.01.11 AM.png

put 2 technic gear 40 tooth on the lego technic axle 8 and add the lego technic bushing stop after the 2 40 tooth gears

Final Motor and Gear Setup

Screen Shot 2017-12-12 at 10.06.22 AM.png
Screen Shot 2017-12-12 at 10.06.09 AM.png

put the axle in the lego 8883-M motor

Control

IMG_5075 2.JPG
  1. tape the battery box to the penny board

Wheels

IMG_5076 2.JPG

1. put the 4 lego 68.8 x 36 weel rim on the wheels.

Final Setup

IMG_5080 2.JPG
IMG_5078 2.JPG
IMG_5077 2.JPG
IMG_5079 2.JPG

  1. duct tape the whole motor to the penny board so that the gears touch directly to the wheel.