Electric Drill Bike
by griffenjoy1277 in Workshop > Electric Vehicles
10061 Views, 42 Favorites, 0 Comments
Electric Drill Bike
![photo-2014-05-16 7:36 PM.jpg](/proxy/?url=https://content.instructables.com/FR4/7H7J/HV9FUW4S/FR47H7JHV9FUW4S.jpg&filename=photo-2014-05-16 7:36 PM.jpg)
This bike is powered by a drill and goes as fast as a barbie jeep with a low battery. This process takes only 10 minutes.
Materials
![photo-2014-05-16 7:36 PM.jpg](/proxy/?url=https://content.instructables.com/FBE/R6EI/HV9FUW4V/FBER6EIHV9FUW4V.jpg&filename=photo-2014-05-16 7:36 PM.jpg)
- Twist Ties
- Drill
- Old bike ( without chain )
- Drill
- Old bike ( without chain )
Twist Tying the Drill to the Bike
![photo-2014-05-16 7:36 PM.jpg](/proxy/?url=https://content.instructables.com/FB0/FW3A/HV9FUW4T/FB0FW3AHV9FUW4T.jpg&filename=photo-2014-05-16 7:36 PM.jpg)
First, you get your bike and twist tie a drill to it. The drill spindle needs to rub against the tire.
Finished!
![photo-2014-05-16 7:36 PM.jpg](/proxy/?url=https://content.instructables.com/FG6/6Y8X/HV9FUW4U/FG66Y8XHV9FUW4U.jpg&filename=photo-2014-05-16 7:36 PM.jpg)
Now you are finished. When you turn on the drill the piece at the end (I think its the spindle) will turn and if it is tight against the tire it should spin. Thanks for viewing!