Eco-Friendly Portable Soldering Station
by BikeHacker in Craft > Cardboard
2202 Views, 12 Favorites, 0 Comments
Eco-Friendly Portable Soldering Station
This is a temporary multipurpose workstation that could be used for many different purposes.
Cut Flaps Off Box.
Cut About 2 or 3 Inches Off the Top of the Box.
Cut Out a Lid/desk That Fits Well on Top of the Box.
Tape on Lid/desk on Both Sides.
Make and Tape Dividers.
The dividers can be customized depending on what you will be putting in it.
Stock With Supplies.
You're Done!