Easy to Make Pen Bow!

For this easy project you will need to take apart a pen and take the pen shaft and the pen cartridge. You will also need a rubber band, a knife or box cutter, and something to poke a hole.

You will need to cut two grooves in the ends of the shaft so you can put a rubber band in it t like in the picture. Also, you will need to cut the rubber band in half in order to do this.

Now with your hole poking device, poke a hole in the center of the pen shaft, and make sure it is wide enough for the cartridge to go through.

Now you can enjoy shooting your very own pen bow!