Easy to Make Key Hook

I was looking for a usable key holder for my home. But in the internet, I found no good idea, so I decided to create my own one.

You need a piece of wood. You can use any kind of wood. I took a piece of an old counter top. The important thing is that it's at least 40 millimeters thick.

My piece of wood is 40 millimeters thick. So i adjusted the circular saw to cut 30 millimeters deep.

I marked the slots for the keys with a 20 millimeter gap.

Then i cut the slots.

To hang it on the wall you need a hole in the back. It is important to drill the hole between the slots. I adjusted the drill press in order not to drill through the wood. In this hanger i drilled only one hole to hang it on the wall with a nail. But after wards Ii found out it is much better to hang it with two nails.

In order to make the chipboard nicer, I decided to grind and paint it.

For a smooth surface I used some wood filler.

Sanding :-)

I used some spray paint from the hardware store.

Hang it on the wall and use it. Well done!