Easy Peasy Japaneasy Trip Wire Trap.

hello everyone as i said on my orange board yesterday this one is going to be quick build its a trip wire trap it literally consists of about 2-3 inches^2 of mettle and two rivets tools required are pretty obvious but my job is to explain it to you so they include.

1. tin snips.
2. pop riveter.
3. needle nose pliers.
4. the other kind of pliers.
5. drill and 9/64 inch drill bit

so lets get to this.

also if you enjoy this try this

pretty explanatory just follow the picks

cut it out and drill the holes mark it as your paty and repeat step whatever this is

just follow the pick

follow the pictures

follow the picks

repeat steps 1 through 6 until you have enough of it all